The AC drive is a general-purpose high-performance current vector control AC drive. It can implement the control of asynchronous motor and permanent magnet synchronous motor (PMSM). It increases the user programmable function, background monitoring software and communication bus function, and supports multi-kind PG cards. It is used to drive various automation production equipment involving textile, paper-making, wire-drawing, machine tool, packing, food, fan and pump.

AC Drive, Adjustable Speed Drive, Digital Frequency Inverter, Electric Motor Controller, Energy Saving Inverter, Frequency Converter, Frequency Inverter, High Efficiency VFD, Industrial Inverter, Inverter Drive, Low Voltage VFD, Medium Voltage VFD, Motor Speed Controller, Single Phase VFD, Soft Start VFD, Three Phase VFD, Variable Frequency Drive, Variable Speed Drive, VFD for Motors, Wide Voltage Range VFD

Product Detail

Components of the HB-H6 series AC drive (plastic housing)

Components of the HB-H6 series AC drive (sheet metal housing)

Product Picture

Parameter table

Technical specifications of the HB-H6 VFD

Item	Specifications
Standard functions	Maximum frequency	Vector control: 0-300 Hz V/F control: 0-3200 Hz
	Carrier frequency	0.5-16 kHz
	Carrier frequency	The carrier frequency is automatically adjusted based on the load features.
	Input frequency resolution	Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.025%
	Control mode	Sensor less flux vector control (SFVC) Closed-loop vector control (CLVC) Voltage/Frequency (V/F) control
	Startup torque	G type: 0.5 Hz/150% (SFVC); 0 Hz/180% (CLVC) P type: 0.5 Hz/100%
	Speed range	1:100 (SFVC) 1:1000 (CLVC)
	Speed stability accuracy	土 0.5% (SFVC) ± 0.02% (CLVC)
	Torque control accuracy	± 5% (CLVC)
Individualized functions	Virtual I/Os	Five groups of virtual DI/Dos can realize simple logic control.
	Timing control	Time range: 0.0-6500.0 minutes
	Multi-motor switchover	Four motors can be switched over via four groups of motor parameters.
	Multiple communication protocols	It supports communication via Modbus-RTU, PROFIBUS-DP, CANlink and CANopen.
	Motor overheat protection	The optional I/O extension card enables AI3 to receive the motor temperature sensor input (PT100, PT1000) so as to realize motor overheat protection.
	Multiple encoder types.	It supports various encoders such as differential encoder, open-collector encoder, resolved and UVW encoder.
	User programmable function	The optional programming card helps you to realize secondary development.
	Advanced background software	It supports the operation of AC drive parameters and virtual oscillate-graph function, via which the state inside the AC drive is monitored.
RUN	Running command source	Operation panel Control terminals Serial communication port You can perform switchover between these sources in various ways.
	Frequency source	There are a total of 10 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. You can perform switchover between these sources in various ways.
	Auxiliary frequency source	There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis.
	Input terminal	Standard: 5 digital input (DI) terminals, one of which supports up to 100 kHz high-speed pulse input5 2 analog input (AI) terminals, one of which only supports 0-10 V voltage input and the other supports 0-10 V voltage input or 4-20 mA current input Expanding capacity: 5 DI terminals 1 AI terminal that supports -10-10 V voltage input and also supports PT100\PT1000
Standard functions	Overload capacity	G type: 60s for 150% of the rated current, 3s for 180% of the rated current P type: 60s for 120% of the rated current, 3s for 150% of the rated current
	Torque boost	Fixed boost Customized boost 0.1%-30.0%
	V/F curve	Straight-line V/F curve Multi-point V/F curve N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square)
	V/F separation	Two types: complete separation; half separation
	Ramp mode	Straight-line ramp S-curve ramp Four kinds of acceleration/deceleration time with the range of 0.0-6500.0s
	DC braking	DC braking frequency: 0.00 Hz to maximum frequency Braking time: 0.0-36.0s Braking action current value: 0.0%-100.0%
	JOG control	JOG frequency range: 0.00-50.00 Hz JOG acceleration/deceleration time: 0.0-6500.0s
	Onboard multiple preset speeds	It implements up to 16 speeds via the simple PLC function or combination of DI terminal states.
	Onboard PID	It realizes process-controlled closed loop control system easily.
	Auto voltage regulation (AVR)	It can keep constant output voltage automatically when the mains voltage changes.
	Over-voltage/ Over-current stall control	The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to Over-voltage/over-current.
	Torque limit and control	It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be implemented in the CLVC mode.
Individualized functions	High performance	Control of asynchronous motor and synchronous motor are implemented through the high-performance current vector control technology.
	Power dip ride through	The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time.
	Rapid current limit	It helps to avoid frequent over-current faults of the AC drive.
RUN	Output terminal	Standard: 1 high-speed pulse output terminal (open-collector) that supports 0-100 kHz square wave signal output 1 digital output (DO) terminal 1 relay output terminal 1 analog output (AO) terminal that supports 0-20 mA current output or 0-10 V voltage output Expanding capacity: 1 DO terminal 1 relay output terminal 1 AO terminal that supports 0-20 mA current output or 0-10 V voltage output
Display and operation on the operation panel	LED display	It displays the parameters.
	Parameter close	Parameters can be cloned quickly via the optional LCD operation panel.
	Key locking and function selection	It can lock the keys partially or completely and define the function range of some keys so as to prevent mis- function.
	Protection mode	Motor short-circuit detection at power-on, input/ output phase loss protection, over-current protection, Over-voltage protection, under voltage protection, overheat protection and overload protection
	Optional parts	LCD operation panel, braking unit, I/O extension card 1, I/O extension card 2, user programmable card, RS485 communication card, PROFIBUS-DP communication card, CANlink communication card, CANopen communication card, differential input PG card, UVW differential input PG card, resolved PG card and OC input PG card
Environment	Installation location	Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapor, drip or salt.
	Altitude	Lower than 1000 m
	Ambient temperature	-10°C to +40°C
	Humidity	Less than 95%RH, without condensing
	Vibration	Less than 5.9 m/s2 (0.6 g)
	Storage temperature	-20°C to +60°C
	IP level	IP20
	Pollution degree	PD2
	Power distribution system	TN, TT

Nanjing Zhengfeng Foreign Trade Service Co., Ltd

Quick Links

Blog

Search for more

WhatsApp&WeChat：008615195918392

Email：njzfelectric@zftrades.com

njzfelectric@zftrades.com
008615195918392
Address: No.6， Xingzhi Rd, Qixia District, Nanjing, Jiangsu Province, 210046, China

HB-H6 series Industrial Grade Frequency Inverter (VFD) with Energy Efficiency

Product Recommendation

AC contactor NXC-22 36V 50Hz 36V 22A

3 Phase Ammeter with Data Logging Track Current Trends over Time for Informed Decisions

First generation track socket (right incoming line) 25A Right incoming line with 25A switch and 60CM switch for exposed and concealed installation

Recent Articles

Pioneering Progress in the Electrical Realm

Exceptional Electrical Solutions: A Customer’s Testimonial

Short Description:

Product Detail

Parameter table