pure sine wave

Product Advantages

• Pure sine wave inverter

The device is able to output pure sine wave current, which is critical for most sensitive electronic devices (such as computers, precision instruments, etc.), because pure sine wave current can provide a stable power supply and avoid equipment damage or performance degradation.

• Bypass output the maximum output power

The bypass output reaches a maximum power output of 6500W/6500VA, which means that in an emergency, the equipment can continuously provide enough power to the load to ensure the normal operation of critical equipment.

• Single-phase 110VAC, separate phase 220V or output 110V and 220V at the same time

The device supports a variety of voltage output modes, which can meet the power needs of different countries and regions and different equipment. The function of output 110V and 220V at the same time increases the flexibility and universality of its use.

• Parallel connection is supported

Up to 6 devices can be connected in parallel, and the expansion scale can be up to 39KW. This feature makes the device scalable and reliable in large power demand scenarios.

• Time segment charge and discharge function

By optimizing energy use, the device can be charged and discharged at different time periods according to actual demand, thus using energy more efficiently.

• MPP tracking range

The MPP (maximum power point) tracking range is 150 to 450Vdc, which means that the device can automatically adjust and find the best charging power point over a wide voltage range, thereby increasing charging efficiency.

• Double MPPT

Dual MPPT (Maximum Power Point Tracking) technology allows the device to track the maximum power point of two independent solar power sources at the same time, further improving the efficiency of solar energy utilization.

• Large charging current

Each input current can reach 18A, and the maximum charging current can reach 140A. This feature allows the device to be more efficient and faster when charging.

• Multiple charging methods

Support for mains charging and solar charging, providing users with more charging options.

• Built-in dust and forced air cooling heat dissipation

The dustproof design inside the device can effectively prevent dust from entering and affecting the performance of the device. At the same time, the forced air cooling cooling system can ensure that the equipment can still operate normally in high temperature environments.

• Multiple protection functions

Built-in multiple protection features ensure that the equipment automatically stops in abnormal situations such as overvoltage, overcurrent, and short circuit, thereby protecting the equipment and load from damage.

Product Feature

• Pure sine wave inverter and bypass output

The device supports pure sine wave inverter technology, which means that it is able to provide high-quality AC power for sensitive loads such as electronic equipment, household appliances, etc., to ensure stable operation of the equipment. The bypass output function allows seamless switching to a backup power supply in the event of a primary power failure, ensuring continuity of power supply.

• A variety of AC output modes and charging modes

The device supports five AC output modes, and the output voltage and frequency can be adjusted according to different requirements to adapt to various application scenarios. Three charging modes, such as standard charging, fast charging, and Smart charging, provide flexible charging options to meet different battery types and charging needs.

•  High output power

The maximum output power reaches 11000W/11000VA, which is suitable for high-power equipment or systems to meet high energy consumption requirements.

• Wide range MPP tracking

MPP (Maximum Power Point) tracking ranges from 60 to 500Vdc and can adapt to different lighting conditions and solar panel configurations to ensure maximum energy capture from solar energy.

• Built-in MC4 connector and dual MPPT

The MC4 connector is the solar industry standard connector for easy installation and maintenance. Dual-channel MPPT (Maximum Power Point Tracking) technology allows the device to capture maximum energy from two separate solar panel arrays, improving overall efficiency.

• High input current and multiple charging methods

Each MPPT input current can reach 18A, support large current input, speed up the charging speed. Support mains charging and solar charging, the maximum charging current can reach 160A, providing a flexible and efficient charging solution.

• Built-in dust cover and forced air cooling heat dissipation

The built-in dust cover helps protect the equipment from dust and dirt, extending its service life. The forced air cooling cooling system ensures that the device maintains a proper operating temperature under high load, improving stability and reliability.

•  Multiple protection functions

The device has multiple built-in protection functions, such as overvoltage protection, undervoltage protection, overcurrent protection, and short circuit protection, to ensure the safe operation of the device under various abnormal conditions.

Product Advantages

• Output voltage and power

The output voltage is 230V, and the pure sine wave output ensures the stability and high quality of the power output, which is suitable for all kinds of equipment with high requirements for the quality of the power supply. The output power is up to 6200W, which can meet the power demand of high-power equipment.

• Battery compatibility

The device allows access to 48V system voltage lithium batteries or lead-acid batteries, providing a flexible battery choice to meet the battery use needs of different users.

• Charging capacity

The maximum charging current can reach 120A, which can quickly charge the battery, shorten the charging time, and improve the use efficiency of the device.

• Photovoltaic array access:

Up to 6500W photovoltaic arrays can be accessed to support large-scale photovoltaic power generation systems, improving the power generation capacity and self-sufficiency of the equipment.The wide MPP (maximum power point) tracking range of 60~500V ensures that the equipment can be output at maximum power under various lighting conditions, improving power generation efficiency.

• Multiple protection functions:

Built-in multiple protection functions, such as overvoltage protection, overcurrent protection, short circuit protection, etc., ensure the safe operation of the equipment in abnormal conditions and extend the service life of the equipment.

• Operation mode:

Support parallel single phase or three phase operation, to meet the power demand in different scenarios. Whether it is home, business or industry, you can find a suitable way to operate.

Product Feature

•  Pure sine wave inverter technology

The use of pure sine wave inverter technology to ensure that the output alternating current waveform is highly consistent with the mains waveform, suitable for a variety of sensitive electronic equipment power supply, such as computers, precision instruments, etc., to avoid equipment damage or performance degradation caused by waveform distortion.

• Bypass output function

The device is equipped with bypass output. When the inverter is faulty, the device automatically or manually switches to the bypass mode to ensure constant power supply and improve system reliability and continuity.

• High output power

The maximum output power can reach 6200W, meet the power needs of high-power equipment, suitable for home, commercial and industrial applications.

• Wide range MPP tracking

With 60~450Vdc maximum power point tracking (MPP) capability, it can automatically adjust the output voltage of photovoltaic panels under different lighting conditions, maximize the use of solar energy and improve power generation efficiency.

• Multiple charging methods

Support mains charging and photovoltaic charging, flexible to adapt to different environments and needs. The maximum charging current can reach 120A, which can quickly replenish electric energy and shorten the charging time.

•  Dual AC input

Allow simultaneous access to the mains and generator as input sources, enhance power supply stability and emergency response ability, to ensure that when the mains is interrupted, the generator can be quickly connected to the power supply.

• Dual AC output

Built-in dual AC output to provide independent power supply channels for different loads, increasing power flexibility and system redundancy.

• Dustproof and heat dissipation design

Built-in dustproof cover effectively prevents dust from entering and extends equipment life; Air cooling forced heat dissipation system is adopted to ensure stable operation of the equipment in high temperature environment.

• Multiple protection function

Built-in over voltage, under voltage, over current, short circuit, overload, overheating and other multiple protection mechanisms, effectively protect equipment and load safety, to avoid accidental damage.

• MC4 connector and plug-in photovoltaic input

The standard MC4 connector is used to facilitate the quick connection and disconnection of photovoltaic modules, simplify the installation and maintenance process, and improve the flexibility and scalability of the system.

The off-grid pure sine wave inverter with an output power of up to 6200W shows its powerful power conversion capability. The inverter is equipped with a wide photovoltaic input voltage range of 90~500Vdc, which means that it can work stably under a variety of different voltage conditions and flexibly adapt to the output characteristics of various photovoltaic modules. The inverter is not only suitable for lithium batteries, but also compatible with lead-acid batteries, providing more options for users with different needs. Its maximum charging current can reach 120Amp, which can quickly replenish the battery pack, shorten the charging time, and improve energy efficiency. To enhance the user experience, the inverter also supports remote communication via WIFI. Users can remotely monitor the operating status of the inverter, adjust parameter Settings, and even fault diagnosis through devices such as smartphones or computers, which greatly improves the convenience and efficiency of management. In addition, the inverter is also equipped with dual load output function to ensure stable and safe load power supply. When one load is faulty, the other load immediately takes over the power supply to avoid power interruption and ensure the continuous running of the device.

90~140Vac AC input voltage range, 120~500Vdc wide photovoltaic input voltage range, AC output power up to 5000W, output power factor 1.0, maximum charging current up to 80A, MPPT efficiency is not less than 99.9%, Support external WIFI communication module, suitable for 24V/48V lithium battery and lead-acid battery, intelligent variable speed fan efficient forced heat dissipation, can automatically enter the power saving mode.

Product Superiority

• Pure sine wave inverter

The equipment adopts advanced inverter technology, which can output pure sine wave current highly consistent with the mains waveform. This current waveform is not only stable, but also clean, and can be perfectly adapted to a variety of electronic devices, especially those with high current quality requirements for sensitive equipment, such as computers, precision instruments, etc. The application of pure sine wave inverter technology can avoid the damage caused by waveform distortion and effectively extend the service life of electronic equipment.

• Bypass output function

In order to ensure the continuity and reliability of power supply, the device has a built-in bypass circuit. When the inverter fails or needs to be shut down for maintenance, the bypass circuit can respond quickly and automatically switch to the bypass mode to ensure that the load equipment can continue to obtain power supply. This design not only avoids the risk of power outages due to inverter failure, but also improves the overall reliability and stability of the equipment.

• Maximum output power 3600W

The device has a strong output capacity, the maximum output power of up to 3600W, this output power is enough to meet the power needs of most families, small business places and outdoor adventure activities. Whether it is daily household appliances or professional equipment, it can be easily accessed to ensure the adequacy and stability of the power supply.

• Dual AC output

In order to meet the diverse needs of different users, the device provides a dual AC output design. Users can allocate power to different load devices according to actual demand. This design not only improves the flexibility of power use, but also enables the equipment to better adapt to various complex scenarios and achieve more refined power management.

• Wide range MPP tracking

The device supports MPP (maximum power point tracking) technology, and the tracking range is wide, from 90Vdc to 500Vdc. This means that it can be efficiently paired with various sizes of solar panels, regardless of size, to maximize the conversion of solar energy into electricity. This feature not only improves the efficiency of solar energy utilization, but also enables the equipment to better adapt to various lighting conditions, ensuring the stability and reliability of the power supply.

• Compatible with a variety of batteries

In order to meet the energy storage needs of different users, the device is compatible with 24V system voltage lithium batteries or lead-acid batteries. Users can choose the right battery type to access according to their actual situation and budget. This design not only improves the flexibility and applicability of the device, but also provides users with more choices and convenience.

• Efficient charging

The device supports two ways of mains charging and solar charging, and the maximum charging current can reach 120A. This high-speed charging capability greatly reduces the time required for the battery to be fully charged, improving the overall efficiency of the device. Whether it is quick charging in an emergency or daily charging, it is easy to cope with.

• Multiple security

In order to ensure the safe use of electricity by users, the device has built-in multiple protection functions. Including overload protection, short circuit protection, overtemperature protection, etc. These protection functions can monitor the operating status of the equipment in real time, and take immediate measures to protect it once an abnormal situation is found. This design not only improves the safety of the device, but also provides users with greater peace of mind

Product Superiority

• Excellent output performance: 3000W strong power to meet a variety of electricity demand

The maximum output power of this inverter is up to 3000W, which not only means that it can easily cope with the power needs of household daily electricity, small business places, but also in some application scenarios in the industrial field. Its pure sine wave output can perfectly adapt to a variety of sensitive electronic devices, avoid damage caused by waveform distortion, and make your electricity experience smoother and wordless.

• A wide range of photovoltaic input compatibility: 30-400Vdc wide range, adapt to a variety of lighting conditions

The wide photovoltaic input voltage range of 30-400Vdc is a highlight of this inverter. This design enables the inverter to adapt to different specifications of photovoltaic panels, whether it is a sunny day, rainy weather, or complex and changeable lighting environment, this inverter can maintain the best power generation efficiency, ensuring the stability and continuity of power supply.

•  Battery compatibility: dual choice of lithium battery and lead-acid battery to meet individual needs

In terms of battery compatibility, this inverter also performs well. It supports two types of lithium battery and lead-acid battery, providing users with more options. At the same time, the inverter also has an intelligent battery management system, which can monitor the battery status in real time, optimize the charging and discharging process, extend the battery life, and reduce operation and maintenance costs.

• Efficient charging technology: 80A maximum charging current, quickly restore power supply

In terms of charging capacity, this inverter is also not to be underestimated. Its maximum charging current can reach 80A, which means that it is able to fully charge the battery at a faster speed, greatly reducing the charging time and improving the usability of the device. In case of emergency, the inverter can quickly restore the power supply, ensuring that the user's electricity needs are met. In addition, the inverter also supports two ways of mains charging and photovoltaic charging, providing users with more choices to meet the charging needs of different scenarios.

•  Intelligent remote monitoring: Convenient experience of external WIFI to achieve intelligent management

Support for external WIFI and remote monitoring is another highlight of this inverter. The user can view the working status and power output of the inverter at any time through the mobile phone or computer to achieve intelligent management. This feature not only improves the maintainability and convenience of the device, but also allows users to keep track of the power supply anytime, anywhere, and make timely adjustments and optimizations. At the same time, the inverter also supports a variety of communication protocols and data interfaces, which is convenient for users to connect and share data with other smart devices to achieve more intelligent and efficient power management.

• Durable surface treatment: reliable guarantee of high corrosion resistance and adapt to harsh environment

In terms of appearance design, this inverter pays equal attention to durability and aesthetics. It uses a durable surface treatment process with high corrosion protection to maintain excellent performance in harsh environments. At the same time, the inverter also has the characteristics of waterproof and dustproof, which can adapt to the needs of various outdoor application scenarios.

•  Efficient heat dissipation design: forced air cooling fan and low no-load self-loss, to achieve energy saving and environmental protection

The built-in efficient forced air cooling fan is at the heart of this inverter's cooling design. When working at high loads, the fan can quickly expel the heat inside the inverter to ensure that the equipment maintains low temperature operation. At the same time, the no-load self-loss of less than 35W design further reduces the energy consumption of the equipment, to achieve the goal of energy conservation and environmental protection. In addition, the inverter also has a variety of protection functions such as overheating, overcurrent, short circuit, etc., to ensure that the power supply can be cut off in time in abnormal circumstances to protect equipment and personal safety.

Product Superiority

• Excellent output performance - strong power of 3000W

The inverter has a maximum output power of up to 3000W, which not only means that it can easily cope with the daily electricity needs of households, small commercial premises, and even in some application scenarios in the industrial sector. Whether it is driving high-power appliances, starting large equipment, or providing stable power support in an emergency, this inverter provides strong power to ensure the stability and continuity of the power supply.

•  A wide range of photovoltaic input compatibility - 30-400Vdc wide range

Its wide photovoltaic input voltage range of 30-400Vdc provides users with great flexibility. No matter what type of photovoltaic panel you use, no matter how the lighting conditions of the installation environment change, this inverter can achieve efficient photoelectric conversion, converting solar energy into electricity, to meet your electricity needs. This feature enables the inverter to maintain the best power generation efficiency under various lighting conditions, greatly enhancing its applicability and practicality.

•  Battery compatibility - lithium battery and lead-acid battery dual choice

In terms of battery compatibility, this inverter also performs well. It supports two types of lithium battery and lead-acid battery, providing users with more options. Lithium battery with its high performance, long life and lightweight characteristics, has become the first choice for users who pursue high-quality life; The lead-acid battery has won the favor of the majority of users for its advantages of economic benefits, technology maturity and easy maintenance. No matter which battery you choose, this inverter is a perfect match to ensure the stability and durability of the power supply.

• Efficient charging technology - 80A maximum charging current

In terms of charging capacity, this inverter is also not to be underestimated. Its maximum charging current can reach 80A, which means that it is able to fully charge the battery at a faster speed, greatly reducing the charging time and improving the usability of the device. In case of emergency, the inverter can quickly restore the power supply, ensuring that the user's electricity needs are met. At the same time, the efficient charging technology also helps to extend the service life of the battery and reduce the user's operation and maintenance costs.

• Intelligent remote monitoring - Convenient experience with external WIFI

Support for external WIFI and remote monitoring is another highlight of this inverter. The user can view the working status and power output of the inverter at any time through the mobile phone or computer to achieve intelligent management. This feature not only improves the maintainability and convenience of the device, but also allows users to keep track of the power supply anytime, anywhere, and make timely adjustments and optimizations.

•  Durable surface treatment - reliable guarantee of high corrosion resistance

In terms of appearance design, this inverter pays equal attention to durability and aesthetics. It uses a durable surface treatment process with high corrosion protection to maintain excellent performance in harsh environments. Regardless of the harsh environment such as humidity, high temperature or corrosive gas, it will not cause damage to the inverter to ensure its long-term stable operation. This design not only extends the service life of the inverter, but also improves its overall reliability and stability.

• Efficient heat dissipation design - forced air cooling fan and low no-load self-loss

The built-in efficient forced air cooling fan is at the heart of this inverter's cooling design. When working at high loads, the fan can quickly expel the heat inside the inverter to ensure that the equipment maintains low temperature operation. At the same time, the no-load self-loss of less than 35W design further reduces the energy consumption of the equipment, to achieve the goal of energy conservation and environmental protection. This design not only improves the working efficiency and stability of the inverter, but also reduces the operation and maintenance cost of the user.